Technical Support (937) 890-5197
FREE D-I-Y Support	ENGINEERING SUPPORT	CUSTOMER REPAIR

SHOPSMITH ENGINEERING SUPPORT

Book An Appointment Today!

12 NOON - 3:00 PM

Monday - Friday • Eastern Standard Time

Only $19.99 for Your First 15 Minutes & $1.00 Per Minute After

Schedule an Appointment
Online
(Click Now)

(937) 890-5197
Call For an Appointment

If Our Tech Team is on a Call, Leave a

Message. They will Call you Back.

HOW IT WORKS:

✓ WARRANTY	✓ NO WARRANTY
If your equipment is under Warranty, call our Customer Care Line at (937) 890-5197 at no charge to you.	If your equipment is Not Under Warranty, or you acquired it from a source other than Shopsmith, contact a Shopsmith Tech Expert.

YOU ASKED FOR IT, WE ARE DELIVERING

With a long heritage of over 63 years and 600,000 plus machines in circulation, our Customers have asked for more access to Shopsmith Engineer Support to:

Provide recommendations for keeping your machine operating at optimum efficiency
Help guide you through a procedure
Assist with source materials such as diagrams, manuals, etc.
Guide you through part selection for a technical issue
Direct you to the wealth of "Getting Started" Materials
Or even just to walk you through how to get started!

The Shopsmith Engineering Team is lead by our Shopsmith Engineer, a leading Quality Assurance Professional And 40+ Year Shopsmith Veteran. If his team can't help, it's likely nobody can.

While we wish we could bottle Shopsmith Experts, and have unlimited resources, they just aren't available. So, we have created a special Shopsmith Engineering Support Line especially dedicated for Equipment No Longer Under Warranty. (Our equipment is such high quality; it lasts and lasts!)

#	WHAT	HOW
1	Schedule an Appointment	Book Online
1	Schedule an Appointment	Call Customer Care at (937) 890-5197 to Schedule For You
2	Pay by Credit Card	Provide your Credit Card information to bill you for: $19.99 for the first 15 Minutes of your call. Any time over 15 minutes will be billed at $1.00 per minute You will be quoted for estimated additional time if your call takes longer than 15 minutes. No Money will be refunded for Less than 15 minutes
3	Get The Most From Your Call!	When Scheduling Online Yourself, will be able to: Schedule your appointment & receive a confirmation Provide information on what you need so the Tech Expert can prepare for your call Include pictures or videos to assist your Tech Expert
		Calling Engineering Technical Support Directly will allow you to have immediate response if they are available, and do not have a scheduled appointment, during 12:00pm & 3:00pm, M-F, Est.
		Calling our General Customer Care Line will allow you to have a Representatives schedule your Shopsmith Engineering Support Appointment so you don’t have to. They will direct you through how to provide information to the Shopsmith Engineering Support Team.

We Look Forward to Speaking with You!

STEP 2: ASSEMBLING THE HORIZONTAL BORING COMPONENTS YOU WILL NEED TO GET STARTED

To view a brief (few-seconds long) video clip of each step being performed click on this icon play video wherever you see it.

With the machine in horizontal position, start by attaching the drill chuck to the spindle. Tighten it securely using your 5/32" Allen wrench.

Attach drill chuck to spindle, tightening against the flat

Tighten Set Screw Against Flat of the Spindle

Next, in preparation for boring, position the table carriage near the headstock with the worktable installed. You can adjust its position to the ideal distance later, when you set-up for a specific task.

Position the Table

Attach your rip fence to the worktable. You will use the fence as a backup to keep your workpiece from moving on the table surface during your horizontal boring operation(s).

Install Fence

See How Simple That Was!

Now that you've located and assembled the components you'll need for Horizontal Boring, CLICK HERE to get started by performing the most common horizontal boring operation, doweling -- where you join two (or more) narrow boards together, to create a wide board or panel.

Getting Started

Introduction
Knowing Your Machine
Getting Ready
Table Saw
- Table Saw Video
- Components Required
- Table Saw Set-Up
- Making a Crosscut
- Making a Rip Cut
- Table Saw Safety Rules
- Table Saw Speed Chart
Drill Press
- Drill Press Video
- Components Required
- Drill Press Set-Up
- Drill Simple Holes
- Drilling Dowel or Rod
- Drill Press Safety Rules
- Drill Press Speed Chart
Horizontal Boring
- Horizontal Boring Video
- Components Required
- Horizontal Boring Set-Up
- Horizontal Boring For Doweling
- Horizontal Boring Safety Rules
- Horizontal Boring Speed Chart
Disc Sanding
- Disc Sanding Video
- Components Required
- Disc Sanding Set-Up
- Freehand Disc Sanding
- Disc Sanding Identical Lengths
- Disc Sander Safety Rules
- Disc Sander Speed Chart
Lathe
- Lathe Video
- Components Required
- Lathe Set-Up
- Learning Lathe Turning
- Lathe Safety Rules
- Lathe Speed Chart
Over-Table Router
- Router Video
- Components Required
- Router Set-Up
- Router Sliding Dovetail
- Router Safety Rules
Under-Table Shaper
- Shaper Video
- Components Required
  - MARK 7
- Shaper Set-Up
- Shaping Decorative Edge
- Shaper Safety Rules
Making a Project
- Toy Train Example

Shopsmith Mark V/Mark 7 Information

Mark V/Mark 7 Service Information and Summary Manuals

Our New Products

Other Information Manuals

Shopsmith Mark V/Mark 7

Other Products

HOW IT WORKS:

YOU ASKED FOR IT, WE ARE DELIVERING

We Look Forward to Speaking with You!

STEP 2: ASSEMBLING THE HORIZONTAL BORING COMPONENTS YOU WILL NEED TO GET STARTED

Getting Started

Shopsmith Mark V/Mark 7 Information

Mark V/Mark 7 Service Information and Summary Manuals

Our New Products

Other Information Manuals

Shopsmith Mark V/Mark 7

Other Products

HOW IT WORKS:

YOU ASKED FOR IT, WE ARE DELIVERING

We Look Forward to Speaking with You!

STEP 2: ASSEMBLING THE HORIZONTAL BORING COMPONENTS YOU WILL NEED TO GET STARTED

Getting Started

Subscribe to our mailing list