info@shopsmith.com
Shopsmith Quick-Acting Drill Press Vise
New! Quick-Acting Drill Press Vise Is The Most Fully-Featured, Best-Working Model We've Ever Offered
If you're a Shopsmith owner, you've probably already figured out that having a great drill press vise could be a BIG help for holding small workpieces while you bore holes, rout mortises and perform other operations with your Shopsmith set-up in vertical drill press mode.
Here's a Solution
This great Drill Press vise offers 4" wide jaws that adjust rapidly with a push-button, quick-release mechanism. It can be mounted easily to your drill press table with the included sliding T-Nuts or through your Mark V Model 500 saw table insert using C-Clamps (not included).
Quick-release button lets you slide jaws open and closed FAST
Rubberized grip feels comfortable in the hand
Handle can lock into position at 90° angle for added leverage
Just a Few Ways You Might Use This Vise
On Your Mark V or Mark 7
- Line drilling small boards or dowels
- Center drilling small workpieces vertically
- Routing slots & mortises
- Hollow chisel mortising
- Pen-making operations
Specifications
| Size | 2-3/4" high x 6" wide x 13" long |
| Base | Rugged, Reinforced Cas Aluminum, 6" Wide x 7-1/8" Long with Two 1/2" x 4-1/4" Mounting Slots |
| Slides | (Two) 1/2" Diameter Steel Rods |
| Jaws | 1-1/2" high X 4" wide X 1/4" thick steel - Removable with horizontal & vertical V-slots on one jaw |
| Adjust Rod | 15/32" diameter plated steel with quick-acting Acme threads |
| Capacity | Opens to 3-15/16" with steel jaws attached - 4-3/8" with steel jaws removed |
Includes:
Vise
• (2) Sliding T-nuts
• (2) Buttonhead Bolts
• (2) Fender Washers for Mounting to Your Shopsmith Table T-slots
Note: C–Clamps needed for mounting Drill Press Vise to Mark V Model 500 saw table insert are not included. Color may vary from the item shown in the photos.
556416 Quick-Acting Drill Press Vise ... $59.64
Other Items You May Need
Sliding Base & Accessory Jaws
Plans and hardware for a sliding base plus 16 accessory jaws for you combination vise.
Flip-Up Eurogaurd
EuroGuard delivers fast, hassle-free tool changeovers, improved dust collection efficiency and added workshop safety.
Order on the Web or by Phone, if you prefer --
(937) 890-5197.
Call before 4:30 PM Eastern Time
© SHOPSMITH - DREAM IT! BUILD IT! SHARE IT!