Shopsmith Shaper Table Inserts
Shaper Table Insert is a Must For Full Profile Shaping
Mark 7/Mark V (model 505 510 520) table insert is made of rigid cast aluminum (Mark V model 500 insert is made of a tough polymer). Both have a 2-1/4" diameter circular cutout to allow the shaper cutter to drop below the table surface to shape edges completely and smoothly. Two holes for screw-in starter pins. Provision for attaching vacuum attachment for dust collection.
Note: Mark 7 /Mark V model 505, 510, 520 insert shown.
555122 Shaper Table Insert
(Mark 7 and Mark V models 505, 510 and 520) ...
$32.70
556267 Shaper Table Insert
(Mark V models 500) ...
$43.67
You Might Also Be Interested In:
Order on the Web or by Phone, if you prefer --
(937) 890-5197.
Call before 4:30 PM Eastern Time
Copyright © 2018 RLFShop LLC-Shopsmith All rights reserved.