10 inch Carbide-Tipped Thin-Kerf Saw Blade Packages
10-inch Carbide-Tipped Thin-Kerf Blades Slice Smoothly Through the
Hardest Woods and Require Less Frequent Sharpening than Steel Blades
Specialty Sawing Package Provides Versatility At a Nice Savings
Thin Kerfs Make the Difference
These carbide-tipped blades deliver a narrower 3/32" kerf... unlike many blades that take a kerf of 1/8" or more. As a result, Shopsmith blades cut quickly and efficiently and require less horsepower than many competitive blades.
These Shopsmith blades feature expansion slots to minimize vibration giving you a cleaner cut. They'll also reducing noise the blade produces.
The Trade-Off Between Rip, Crosscut and Combination Blade Types
Before making your blade selection, it's important to know that there are compromises. Although combination blades deliver excellent cuts in most situations, the best cuts are produced by job-specific blades.
Ripping's large chip size requires deep gullets that quickly remove lots of waste. With more space consumed by the gullets, ripping blades have fewer teeth. Smooth crosscuts make fine dust, so more teeth and shallower gullets produce the best results. If your projects frequently require a large volume of continuous crosscutting or ripping, it stands to reason that you'll enjoy faster cutting and smoother results by using a purpose-specific cross-cut or rip blade.
However, if most of your projects require that you frequently switch back-and-forth between crosscutting and ripping, the minimal trade-off in cut quality that comes with using a combination blade could quickly pay you back in terms of saved blade-changing time.
Enjoy Maximum Versatility - at an Attractive Savings
Specialty Sawing Package
Our specialty sawing package gives you the fastest, smoothest cuts for all of your projects -- and saves you $55.55 in the bargain ! You'll get three blades (combination, ripping, and cross-cutting) -- plus three 1-1/4" saw blade arbors to go with them. With this package, you can have all three blades pre-mounted and ready to go to work on a moment's notice !
Includes: (1) 555958 50-tooth combination blade • (1) 555959 24-tooth rip blade • (1) 555960 60-tooth cross-cut blade • (3) 1-1/4" saw arbors.
556037 Carbide-tipped Specialty Saw Blade Package
(for Mark 7 and Mark V models 505 510 and 520) ...
$309.81
556036 Carbide-tipped Specialty Saw Blade Package
(for Mark V model 500) ...
$309.81
Order on the Web or by Phone, if you prefer --
(937) 890-5197.
Call before 4:30 PM Eastern Time
Copyright © 2018 RLFShop LLC-Shopsmith All rights reserved.
Sawsmith® is a registered trademark of RLFShop LLC
