DC-3300 Dust Collector Handle Retro-Fit Kit
Front Handle Retro-Fit Kit Make Moving Your Shopsmith DC-3300 Dust Collector Easier
Shopsmith DC-3300 Dust Collector Handle Retro-Fit
This inexpensive, simple-to-install kit lets you attach an additional handle to the top of the 3-way inlet on your DC3300 for convenience when moving it around the shop. You'll need a center punch, a 5/32" drill bit and a Phillips screwdriver to do the job. Takes about 5 minutes.
Includes: • Handle • Two screws and • a Template for marking pilot hole positions.
Note: For Dust Collectors Made Prior to May 2000.
521769 DC-3300 Handle Retro-Fit Kit ... $15.87
You Might Also Be Interested In:
Dust Collector Hose - 16' Clear ... $54.56
Heavy-Duty Dust Collection Bags Standard Size (6-Pk) ... $15.99
Other Items You May Need
Stay-Put Dust Collection Pickup and Clamp System
The 2-1/2" hose expands from 12" to 36" in length, can be bent into practically any shape, and stays where you aim it !
Wireless On / Off Switch
Wireless On/Off switch that is rated at 8 amps and allows you to turn your DC-3300 on or off remotely from anywhere in your shop area.
Order on the Web or by Phone, if you prefer --
(937) 890-5197.
Call before 4:30 PM Eastern Time
Copyright © 2018 RLFShop LLC-Shopsmith All rights reserved.
